|
A Pistonless pump is a type of pump designed to move fluids without any moving parts other than three chamber valves. The pump contains a chamber which has a valved inlet from the fluid to be pumped, a valved outlet - both of these at the bottom of the pump, and a pressurant inlet at the top of the pump. A pressurant is used, such as steam or pressurized helium, to drive the fluid through the pump. ==Introduction== NASA have developed a Low cost rocket fuel pump which has Comparable performance to turbopump at 80-90% lower cost. Perhaps the most difficult barrier to entry in the liquid rocket business is the turbo pump. A turbo pump design requires a large engineering effort and is expensive to mfg. and test. Starting a turbo pump fed rocket engine is a complex process, requiring a careful of many valves and subsystems.In fact ,Beal aerospace tried to avoid the issue entirely by building a huge pressure feed booster. Their booster never flew, but the engineering behind it was sound and ,if they had a low cost pump at their disposal ,they might be competing against Boeing. This pump saves up to 90% of the mass of the tanks as compared to a pressure fed system. This pump has really proved to be a boon for rockets . By this pump the rocket does not have to carry heavy load and can travel with very high speed. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Pistonless pump」の詳細全文を読む スポンサード リンク
|